Remote Control Synchronous Servo Motor for Intelligent Motion Systems

Remote Control Synchronous Servo Motor for Intelligent Motion Systems

 Remote Handle Synchronous Servo Motor For CZPT Motion Systems

57IV90/57IV130/57IV180 Functions
one.Operating voltage: DC input voltage 15VDC to 50VDC ,suggest voltage is 36V
two.The max continuous output current is 10A, the max peak present is 22A (three times overload capability) 
3.Acceptable differential or single-ended pulse / route command, have three management manner of placement, speed and torqe
four.Making use of FOC magnetic situation handle technological innovation and space vector pulse width modulation (SVPWM) shut-loop control engineering
five.The number of pulses per cycle (subdivision) can be set by the debug software or the dial change location(electronic gear ratio)
six.Have a few sorts of 90w,130w and 180w DC brushless servo motor to decide on.
7.Have security of overvoltage, undervoltage, overcurrent and tolerance,and so on.
8.Single / double pulse mode, the pulse valid edge can be pick.
9.The max pulse frequency of control instruction is 500KHz (manufacturing facility default is 200KHz)
10.Pulse, direction and permit sign enter interface level is four.5 to 28V compatible
11.With serial RS232 / RS485 debugging function, but require to use our particular serial debugging cable 
12.Performance: clean speed, small overshoot ,small monitoring mistake, reduced warmth of motor and driver

Driver Product And Selection Xihu (West Lake) Dis.

Motor Type  57IV90 57IV130 57IV180
Rated power(W) 90W 130W 180W
Vector Maximum Current 16A 18A 22A
Body Length(MM) 106.2 0.five 126.2 0.5 146.2 0.5
Operation Voltage 15-50Vdc,36Vdc recommend 
Overvoltage Protection Voltage 68Vdc±2
Control Method 32 bits DSP vector FOC control technology
Pulse Limit Frequency 500KHz(factory default 200KHz)
Defense Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm
Input Signal  Pulse, direction and enable differential / single-ended interface signal,
interface level 4.five-28Vdc compatible, no need external current limiting resistor
Output Signal  Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
Electronic Gear Ratio Default 4000 / rev, through the DIP switch or debug software setting subdivision
(200-51200)
Position Error Control Accuracy ±1 Pulse
Speed Control Accuracy  ±2 rpm
Maximum  Acceleration 100 rpm/ms

Dialing Swap Settings

Pulse/Rev. SW1 SW2 SW3 SW4
Default ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
one thousand ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
ten thousand OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Subdivision accuracy (digital equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the drive uses the inside default micro-step subdivision, the default interior subdivision of the driver is 400Pulse / rev, and the digital gear ratio can also be established by the debugging application. SW5 established the motor direction,when turnON, the motor turns clockwise (CW),when flip OFF, the motor turns counterclockwise(CCW). SW6 management method variety, whenON, the motor enters the self-take a look at manner,producing 1 CZPT and reverse revolution, has been repeated until finally exit self-take a look at manner, the external manage signal is invalid at self take a look at manner, whenOFF, the motor exits self-take a look at method,then the exterior handle signal is valid.

Mechanical Construction Dimension

 Driver mode Motor body length(mm) Driver thickness(mm) Integrated motor driver length(mm)
57IV90 76 30.2 106.two
57IV130  96 30.two 126.2
57IV180  116 30.2 149.two

Note : All over is usually employed, and we can personalize in accordance to your ask for or decide on the suitable design for you, please notify us adhering to parameters: existing, voltage, holding torque, entire body duration,the software spot.

Software
Suited for all varieties of small and medium-sized automation equipments and devices. Such as: laser gear, healthcare products, 3D printer, tiny and medium-sized engraving equipment, electronic processing products, automatic crawling gear, special CNC machine resource, packaging equipment and robot. It is especially valuable for end users who expect minimal sound and higher pace programs.

Packaging and transport
one.Outer packing: CZPT export carton with needed shipping and delivery marks
two.Interior packing: Water-resistant packing with shock absorbing EPE and cardboard surrounded 
three.As for each the customers requirements

Our services
1.Working time : eight:00 a.m – ten:00 p.m .Any inquiries, remember to inform us freely, we will be reply you asap.
two.Lead time : For samples, 2 to five times will be Alright. For mass manufacturing, the direct time rely on the portions you need to have.
three.Warrantity period of time : 18 months and Daily life-extended maintenance service for the solution.
4.We take goods customize.

FAQ
Q1: How to decide on the appropriate stepper or servo motor?
A1: There are serveral important things: dimensions, size, holding torque, voltage, existing and many others.After verify them and instructed us, we can pick the appropriate one particular for you.

Q2: Any other techniques to finalize the product?
A2: Confident, you can send out us the model you are making use of, we can help you locate the ideal one.

Q3:How to ensure the Quality of CZPT Components?
A3: We have the built-in system for industrial components top quality control. We have IQC (incoming quality control), IPQCS (in process quality control section), FQC (final good quality control) and OQC (out-going quality manage) to control each approach of industrial elements prodution.

This autumn:What is actually the Edge of Your Components for Sector Items? 
A4:1.The edge of our products is the aggressive prices, quickly shipping and delivery and large high quality. Our
workers are liable-oriented, welcoming-oriented,and diligent-oriented. Our items are featured by strict tolerance, easy complete and extended services time.
2.Ahead of we ship out the goods,we examine them a lot more than 3 moments.

Get in touch with

 

Remote Control Synchronous Servo Motor for Intelligent Motion Systems

Leave a Reply

Your email address will not be published. Required fields are marked *