Tag Archives: gear shaft

China Good quality 3 Phase Synchronous Motor High Speed Electromagnetic Brake AC Three Phase Scooters Elevator Gear Motor Shaft Engine Drive Stepper 3 Phase Synchronous Motor supplier

Product Description

3 Phase Synchronous Motor High Speed Electromagnetic Brake AC Three Phase Scooters Elevator Gear Motor Shaft  Engine  Drive Stepper 3 Phase Synchronous Motor

Application of Synchronous Motor

Synchronous motors are used in a wide variety of applications, including:

  • Pumps
  • Fans
  • Compressors
  • Conveyors
  • Machine tools
  • Wind turbines
  • Generators
  • Clocks
  • Servos
  • Robots

Synchronous motors are preferred over induction motors in applications where a constant speed is required. They are also used in applications where high torque is required, such as in wind turbines and generators.

Here are some of the advantages of using synchronous motors:

  • High efficiency: Synchronous motors are more efficient than induction motors. This is because they do not have slip, which is the difference between the speed of the rotating magnetic field and the speed of the rotor.
  • Constant speed: Synchronous motors can run at a constant speed regardless of the load. This is because the speed of the motor is determined by the frequency of the supply voltage and the number of poles on the stator.
  • High torque: Synchronous motors can produce high torque at low speeds. This makes them ideal for applications where a large amount of power is required, such as in wind turbines and generators.

Here are some of the disadvantages of using synchronous motors:

  • Cost: Synchronous motors are more expensive than induction motors.
  • Complexity: Synchronous motors are more complex than induction motors. This can make them more difficult to install and maintain.
  • Reliability: Synchronous motors are not as reliable as induction motors. This is because they have more moving parts.

Overall, synchronous motors are a versatile and beneficial component that can be used in a wide variety of applications. They can help to improve efficiency, constant speed, and high torque.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: High Speed
Number of Stator: Three-Phase
Function: Driving, Control
Casing Protection: Open Type
Number of Poles: 6
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|

induction motor

What factors should be considered when selecting an AC motor for a particular application?

When selecting an AC motor for a particular application, several factors need to be considered to ensure the motor meets the requirements and performs optimally. Here are the key factors to consider:

  1. Power Requirements: Determine the power requirements of the application, including the required torque and speed. The motor should have adequate power output to meet the demands of the specific task. Consider factors such as starting torque, running torque, and speed range to ensure the motor can handle the load effectively.
  2. Motor Type: There are different types of AC motors, including induction motors, synchronous motors, and brushless DC motors. Each type has its own characteristics and advantages. Consider the application’s requirements and factors such as speed control, efficiency, and starting torque to determine the most suitable motor type.
  3. Environmental Conditions: Assess the environmental conditions in which the motor will operate. Factors such as temperature, humidity, dust, and vibration levels can impact motor performance and longevity. Choose a motor that is designed to withstand the specific environmental conditions of the application.
  4. Size and Space Constraints: Consider the available space for motor installation. Ensure that the physical dimensions of the motor, including its length, diameter, and mounting arrangement, are compatible with the available space. Additionally, consider the weight of the motor if it needs to be mounted or transported.
  5. Efficiency: Energy efficiency is an important consideration, as it can impact operational costs and environmental sustainability. Look for motors with high efficiency ratings, which indicate that they convert electrical energy into mechanical energy with minimal energy loss. Energy-efficient motors can lead to cost savings and reduced environmental impact over the motor’s lifespan.
  6. Control and Speed Requirements: Determine if the application requires precise speed control or if a fixed speed motor is sufficient. If variable speed control is needed, consider motors that can be easily controlled using variable frequency drives (VFDs) or other speed control mechanisms. For applications that require high-speed operation, select a motor that can achieve the desired speed range.
  7. Maintenance and Serviceability: Assess the maintenance requirements and serviceability of the motor. Consider factors such as the accessibility of motor components, ease of maintenance, availability of spare parts, and the manufacturer’s reputation for reliability and customer support. A motor that is easy to maintain and service can help minimize downtime and repair costs.
  8. Budget: Consider the budget constraints for the motor selection. Balance the desired features and performance with the available budget. In some cases, investing in a higher quality, more efficient motor upfront can lead to long-term cost savings due to reduced energy consumption and maintenance requirements.

By carefully considering these factors, it is possible to select an AC motor that aligns with the specific requirements of the application, ensuring optimal performance, efficiency, and reliability.

induction motor

What are the common signs of AC motor failure, and how can they be addressed?

AC motor failure can lead to disruptions in various industrial and commercial applications. Recognizing the common signs of motor failure is crucial for timely intervention and preventing further damage. Here are some typical signs of AC motor failure and potential ways to address them:

  • Excessive Heat: Excessive heat is a common indicator of motor failure. If a motor feels excessively hot to the touch or emits a burning smell, it could signify issues such as overloaded windings, poor ventilation, or bearing problems. To address this, first, ensure that the motor is properly sized for the application. Check for obstructions around the motor that may be impeding airflow and causing overheating. Clean or replace dirty or clogged ventilation systems. If the issue persists, consult a qualified technician to inspect the motor windings and bearings and make any necessary repairs or replacements.
  • Abnormal Noise or Vibration: Unusual noises or vibrations coming from an AC motor can indicate various problems. Excessive noise may be caused by loose or damaged components, misaligned shafts, or worn bearings. Excessive vibration can result from imbalanced rotors, misalignment, or worn-out motor parts. Addressing these issues involves inspecting and adjusting motor components, ensuring proper alignment, and replacing damaged or worn-out parts. Regular maintenance, including lubrication of bearings, can help prevent excessive noise and vibration and extend the motor’s lifespan.
  • Intermittent Operation: Intermittent motor operation, where the motor starts and stops unexpectedly or fails to start consistently, can be a sign of motor failure. This can be caused by issues such as faulty wiring connections, damaged or worn motor brushes, or problems with the motor’s control circuitry. Check for loose or damaged wiring connections and make any necessary repairs. Inspect and replace worn or damaged motor brushes. If the motor still exhibits intermittent operation, it may require professional troubleshooting and repair by a qualified technician.
  • Overheating or Tripping of Circuit Breakers: If an AC motor consistently causes circuit breakers to trip or if it repeatedly overheats, it indicates a problem that needs attention. Possible causes include high starting currents, excessive loads, or insulation breakdown. Verify that the motor is not overloaded and that the load is within the motor’s rated capacity. Check the motor’s insulation resistance to ensure it is within acceptable limits. If these measures do not resolve the issue, consult a professional to assess the motor and its electrical connections for any faults or insulation breakdown that may require repair or replacement.
  • Decreased Performance or Efficiency: A decline in motor performance or efficiency can be an indication of impending failure. This may manifest as reduced speed, decreased torque, increased energy consumption, or inadequate power output. Factors contributing to decreased performance can include worn bearings, damaged windings, or deteriorated insulation. Regular maintenance, including lubrication and cleaning, can help prevent these issues. If performance continues to decline, consult a qualified technician to inspect the motor and perform any necessary repairs or replacements.
  • Inoperative Motor: If an AC motor fails to operate entirely, there may be an issue with the power supply, control circuitry, or internal motor components. Check the power supply and connections for any faults or interruptions. Inspect control circuitry, such as motor starters or contactors, for any damage or malfunction. If no external faults are found, it may be necessary to dismantle the motor and inspect internal components, such as windings or brushes, for any faults or failures that require repair or replacement.

It’s important to note that motor failure causes can vary depending on factors such as motor type, operating conditions, and maintenance practices. Regular motor maintenance, including inspections, lubrication, and cleaning, is essential for early detection of potential failure signs and for addressing issues promptly. When in doubt, it is advisable to consult a qualified electrician, motor technician, or manufacturer’s guidelines for appropriate troubleshooting and repair procedures specific to the motor model and application.

induction motor

What are the key advantages of using AC motors in industrial applications?

AC motors offer several key advantages that make them highly suitable for industrial applications. Here are some of the main advantages:

  1. Simple and Robust Design: AC motors, particularly induction motors, have a simple and robust design, making them reliable and easy to maintain. They consist of fewer moving parts compared to other types of motors, which reduces the likelihood of mechanical failure and the need for frequent maintenance.
  2. Wide Range of Power Ratings: AC motors are available in a wide range of power ratings, from small fractional horsepower motors to large industrial motors with several megawatts of power. This versatility allows for their application in various industrial processes and machinery, catering to different power requirements.
  3. High Efficiency: AC motors, especially modern designs, offer high levels of efficiency. They convert electrical energy into mechanical energy with minimal energy loss, resulting in cost savings and reduced environmental impact. High efficiency also means less heat generation, contributing to the longevity and reliability of the motor.
  4. Cost-Effectiveness: AC motors are generally cost-effective compared to other types of motors. Their simple construction and widespread use contribute to economies of scale, making them more affordable for industrial applications. Additionally, AC motors often have lower installation and maintenance costs due to their robust design and ease of operation.
  5. Flexible Speed Control: AC motors, particularly induction motors, offer various methods for speed control, allowing for precise adjustment of motor speed to meet specific industrial requirements. Speed control mechanisms such as variable frequency drives (VFDs) enable enhanced process control, energy savings, and improved productivity.
  6. Compatibility with AC Power Grid: AC motors are compatible with the standard AC power grid, which is widely available in industrial settings. This compatibility simplifies the motor installation process and eliminates the need for additional power conversion equipment, reducing complexity and cost.
  7. Adaptability to Various Environments: AC motors are designed to operate reliably in a wide range of environments. They can withstand variations in temperature, humidity, and dust levels commonly encountered in industrial settings. Additionally, AC motors can be equipped with protective enclosures to provide additional resistance to harsh conditions.

These advantages make AC motors a popular choice for industrial applications across various industries. Their simplicity, reliability, cost-effectiveness, energy efficiency, and speed control capabilities contribute to improved productivity, reduced operational costs, and enhanced process control in industrial settings.

China Good quality 3 Phase Synchronous Motor High Speed Electromagnetic Brake AC Three Phase Scooters Elevator Gear Motor Shaft Engine Drive Stepper 3 Phase Synchronous Motor   supplier China Good quality 3 Phase Synchronous Motor High Speed Electromagnetic Brake AC Three Phase Scooters Elevator Gear Motor Shaft Engine Drive Stepper 3 Phase Synchronous Motor   supplier
editor by CX 2024-04-09

China Good quality Shaft Dia 18mm 22mm 28mm 32mm 40mm 50mm 100W 200W 400W 750W,1100W 1500W 2200W 3700W Single Phase/Three Phase Electric Small AC Helical Gear Motor wholesaler

Product Description

Model Selection

        ZD Leader has a wide range of micro motor production lines in the industry, including DC Motor, AC Motor, Brushless Motor, Planetary Gear Motor, Drum Motor, Planetary Gearbox, RV Reducer and Harmonic Gearbox etc. Through technical innovation and customization, we help you create outstanding application systems and provide flexible solutions for various industrial automation situations.

• Model Selection

Our professional sales representive and technical team will choose the right model and transmission solutions for your usage depend on your specific parameters.

• Drawing Request

If you need more product parameters, catalogues, CAD or 3D drawings, please contact us.

• On Your Need

We can modify standard products or customize them to meet your specific needs.

Product Parameters

Helical Gear Motor

Mount Type Horizontal / Vertical
MOTOR TYPE Induction Motor 
OUTPUT POWER 100W / 200W / 400W / 750W / 1500W / 2200W / 3700W (Can Be Customized)
OUTPUT SHAFT 18mm / 22mm / 28mm / 32mm / 40mm / 50mm; Round Shaft, D-Cut Shaft, Key-Way Shaft (Can Be Customized)
Voltage type Single phase 110V50/60Hz, 220V/50/60Hz; Three phase 220-240/380-415V, 50/60Hz    
Accessories Electric Brake / Fan / Terminal Box
Gear Ratio 3K-1800K

Type Of Helical Gear Motor

Other Products

 

Company Profile

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Moving Machinery
Operating Speed: Constant Speed
Power Source: AC Motor
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

induction motor

Can you explain the concept of motor efficiency and how it relates to AC motors?

Motor efficiency is a measure of how effectively an electric motor converts electrical power into mechanical power. It represents the ratio of the motor’s useful output power (mechanical power) to the input power (electrical power) it consumes. Higher efficiency indicates that the motor converts a larger percentage of the electrical energy into useful mechanical work, while minimizing energy losses in the form of heat and other inefficiencies.

In the case of AC motors, efficiency is particularly important due to their wide usage in various applications, ranging from residential appliances to industrial machinery. AC motors can be both induction motors, which are the most common type, and synchronous motors, which operate at a constant speed synchronized with the frequency of the power supply.

The efficiency of an AC motor is influenced by several factors:

  1. Motor Design: The design of the motor, including its core materials, winding configuration, and rotor construction, affects its efficiency. Motors that are designed with low-resistance windings, high-quality magnetic materials, and optimized rotor designs tend to have higher efficiency.
  2. Motor Size: The physical size of the motor can also impact its efficiency. Larger motors generally have higher efficiency because they can dissipate heat more effectively, reducing losses. However, it’s important to select a motor size that matches the application requirements to avoid operating the motor at low efficiency due to underloading.
  3. Operating Conditions: The operating conditions, such as load demand, speed, and temperature, can influence motor efficiency. Motors are typically designed for maximum efficiency at or near their rated load. Operating the motor beyond its rated load or at very light loads can reduce efficiency. Additionally, high ambient temperatures can cause increased losses and reduced efficiency.
  4. Magnetic Losses: AC motors experience losses due to magnetic effects, such as hysteresis and eddy current losses in the core materials. These losses result in heat generation and reduce overall efficiency. Motor designs that minimize magnetic losses through the use of high-quality magnetic materials and optimized core designs can improve efficiency.
  5. Mechanical Friction and Windage Losses: Friction and windage losses in the motor’s bearings, shaft, and rotating parts also contribute to energy losses and reduced efficiency. Proper lubrication, bearing selection, and reducing unnecessary mechanical resistance can help minimize these losses.

Efficiency is an important consideration when selecting an AC motor, as it directly impacts energy consumption and operating costs. Motors with higher efficiency consume less electrical power, resulting in reduced energy bills and a smaller environmental footprint. Additionally, higher efficiency often translates to less heat generation, which can enhance the motor’s reliability and lifespan.

Regulatory bodies and standards organizations, such as the International Electrotechnical Commission (IEC) and the National Electrical Manufacturers Association (NEMA), provide efficiency classes and standards for AC motors, such as IE efficiency classes and NEMA premium efficiency standards. These standards help consumers compare the efficiency levels of different motors and make informed choices to optimize energy efficiency.

In summary, motor efficiency is a measure of how effectively an AC motor converts electrical power into mechanical power. By selecting motors with higher efficiency, users can reduce energy consumption, operating costs, and environmental impact while ensuring reliable and sustainable motor performance.

induction motor

Are there energy-saving technologies or features available in modern AC motors?

Yes, modern AC motors often incorporate various energy-saving technologies and features designed to improve their efficiency and reduce power consumption. These advancements aim to minimize energy losses and optimize motor performance. Here are some energy-saving technologies and features commonly found in modern AC motors:

  • High-Efficiency Designs: Modern AC motors are often designed with higher efficiency standards compared to older models. These motors are built using advanced materials and optimized designs to reduce energy losses, such as resistive losses in motor windings and mechanical losses due to friction and drag. High-efficiency motors can achieve energy savings by converting a higher percentage of electrical input power into useful mechanical work.
  • Premium Efficiency Standards: International standards and regulations, such as the NEMA Premium® and IE (International Efficiency) classifications, define minimum energy efficiency requirements for AC motors. Premium efficiency motors meet or exceed these standards, offering improved efficiency compared to standard motors. These motors often incorporate design enhancements, such as improved core materials, reduced winding resistance, and optimized ventilation systems, to achieve higher efficiency levels.
  • Variable Frequency Drives (VFDs): VFDs, also known as adjustable speed drives or inverters, are control devices that allow AC motors to operate at variable speeds by adjusting the frequency and voltage of the electrical power supplied to the motor. By matching the motor speed to the load requirements, VFDs can significantly reduce energy consumption. VFDs are particularly effective in applications where the motor operates at a partial load for extended periods, such as HVAC systems, pumps, and fans.
  • Efficient Motor Control Algorithms: Modern motor control algorithms, implemented in motor drives or control systems, optimize motor operation for improved energy efficiency. These algorithms dynamically adjust motor parameters, such as voltage, frequency, and current, based on load conditions, thereby minimizing energy wastage. Advanced control techniques, such as sensorless vector control or field-oriented control, enhance motor performance and efficiency by precisely regulating the motor’s magnetic field.
  • Improved Cooling and Ventilation: Effective cooling and ventilation are crucial for maintaining motor efficiency. Modern AC motors often feature enhanced cooling systems, including improved fan designs, better airflow management, and optimized ventilation paths. Efficient cooling helps prevent motor overheating and reduces losses due to heat dissipation. Some motors also incorporate thermal monitoring and protection mechanisms to avoid excessive temperatures and ensure optimal operating conditions.
  • Bearings and Friction Reduction: Friction losses in bearings and mechanical components can consume significant amounts of energy in AC motors. Modern motors employ advanced bearing technologies, such as sealed or lubrication-free bearings, to reduce friction and minimize energy losses. Additionally, optimized rotor and stator designs, along with improved manufacturing techniques, help reduce mechanical losses and enhance motor efficiency.
  • Power Factor Correction: Power factor is a measure of how effectively electrical power is being utilized. AC motors with poor power factor can contribute to increased reactive power consumption and lower overall power system efficiency. Power factor correction techniques, such as capacitor banks or power factor correction controllers, are often employed to improve power factor and minimize reactive power losses, resulting in more efficient motor operation.

By incorporating these energy-saving technologies and features, modern AC motors can achieve significant improvements in energy efficiency, leading to reduced power consumption and lower operating costs. When considering the use of AC motors, it is advisable to select models that meet or exceed recognized efficiency standards and consult manufacturers or experts to ensure the motor’s compatibility with specific applications and energy-saving requirements.

induction motor

What is an AC motor, and how does it differ from a DC motor?

An AC motor, also known as an alternating current motor, is a type of electric motor that operates on alternating current. It converts electrical energy into mechanical energy through the interaction of magnetic fields. AC motors are widely used in various applications, ranging from household appliances to industrial machinery. Here’s a detailed explanation of what an AC motor is and how it differs from a DC motor:

AC Motor:

An AC motor consists of two main components: the stator and the rotor. The stator is the stationary part of the motor and contains the stator windings. These windings are typically made of copper wire and are arranged in specific configurations to create a rotating magnetic field when energized by an alternating current. The rotor, on the other hand, is the rotating part of the motor and is typically made of laminated steel cores with conducting bars or coils. The rotor windings are connected to a shaft, and their interaction with the rotating magnetic field produced by the stator causes the rotor to rotate.

The operation of an AC motor is based on the principles of electromagnetic induction. When the stator windings are energized with an AC power supply, the changing magnetic field induces a voltage in the rotor windings, which in turn creates a magnetic field. The interaction between the rotating magnetic field of the stator and the magnetic field of the rotor produces a torque, causing the rotor to rotate. The speed of rotation depends on the frequency of the AC power supply and the number of poles in the motor.

DC Motor:

A DC motor, also known as a direct current motor, operates on direct current. Unlike an AC motor, which relies on the interaction of magnetic fields to generate torque, a DC motor uses the principle of commutation to produce rotational motion. A DC motor consists of a stator and a rotor, similar to an AC motor. The stator contains the stator windings, while the rotor consists of a rotating armature with coils or permanent magnets.

In a DC motor, when a direct current is applied to the stator windings, a magnetic field is created. The rotor, either through the use of brushes and a commutator or electronic commutation, aligns itself with the magnetic field and begins to rotate. The direction of the current in the rotor windings is continuously reversed to ensure continuous rotation. The speed of a DC motor can be controlled by adjusting the voltage applied to the motor or by using electronic speed control methods.

Differences:

The main differences between AC motors and DC motors are as follows:

  • Power Source: AC motors operate on alternating current, which is the standard power supply in most residential and commercial buildings. DC motors, on the other hand, require direct current and typically require a power supply that converts AC to DC.
  • Construction: AC motors and DC motors have similar construction with stators and rotors, but the design and arrangement of the windings differ. AC motors generally have three-phase windings, while DC motors can have either armature windings or permanent magnets.
  • Speed Control: AC motors typically operate at fixed speeds determined by the frequency of the power supply and the number of poles. DC motors, on the other hand, offer more flexibility in speed control and can be easily adjusted over a wide range of speeds.
  • Efficiency: AC motors are generally more efficient than DC motors. AC motors can achieve higher power densities and are often more suitable for high-power applications. DC motors, however, offer better speed control and are commonly used in applications that require precise speed regulation.
  • Applications: AC motors are widely used in applications such as industrial machinery, HVAC systems, pumps, and compressors. DC motors find applications in robotics, electric vehicles, computer disk drives, and small appliances.

In conclusion, AC motors and DC motors differ in their power source, construction, speed control, efficiency, and applications. AC motors rely on the interaction of magnetic fields and operate on alternating current, while DC motors use commutation and operate on direct current. Each type of motor has its advantages and is suited for different applications based on factors such as power requirements, speed control needs, and efficiency considerations.

China Good quality Shaft Dia 18mm 22mm 28mm 32mm 40mm 50mm 100W 200W 400W 750W,1100W 1500W 2200W 3700W Single Phase/Three Phase Electric Small AC Helical Gear Motor   wholesaler China Good quality Shaft Dia 18mm 22mm 28mm 32mm 40mm 50mm 100W 200W 400W 750W,1100W 1500W 2200W 3700W Single Phase/Three Phase Electric Small AC Helical Gear Motor   wholesaler
editor by CX 2024-03-28

China factory AC 230V Hollow Shaft Gear Motor with Good quality

Product Description

Company  Profiles

     
-We are a leading gear motor manufacturer
ZHangZhoug Xihu (West Lake) Dis.hai Reducer is a leading manufacturer of gear motor and gearbox.
Since 1991, we have specialized in manufacturing a wide range of gear motor and gear box including:
 

 

  • helical gear motor
  • helical bevel gear motor
  • parallel shaft helical gear motor
  • helical worm gear motor
  • hoist drive
  • heavy-duty helical gearbox
  • heavy-duty helical bevel gearbox
  • gear motor for car parking system
  • sprial bevel gearbox

Product Description
 

P series gear motor is composed with two-stage or three-stage gears. Input shaft and output shaft is parallel.

Mounting position: footed mounting, flange mounting, shaft mounting etc.

Technical data:

output speed:    10 ~ 752 rpm

rated output torque:10 ~ 20000 Nm

motor power:  0.12 ~ 200 KW

Product Show

Product Specification

 

Product features
1. P series parallel shaft helical gear motor are the perfect solution when installation space is limited under the same permitted torque.
2. Little vibration and low noise, with high transmission efficiency.
3. The many different sizes and designs ensure that the gearmotors can be used in a wide variety of applications even under the most unfavorable conditions,typically used in conveyor and materials processing applications.
General Technical data
Housing material HT250 high-strength cast iron
Housing hardness HBS190-240
Pinion material 20CrMnTiH
Gear material 20CrMnTiH
Surface hardness of gears HRC58°~62 °
Gear core hardness HRC33~40
Input/output shaft material 40CrMnTiH
Input / Output shaft hardness HRC25~30
Machining precision of gears accurate grinding, 6~7 Grade
Lubricating oil GB L-CKC220
Heat treatment tempering, cementiting, quenching, etc.
Efficiency 94%~96% (depends on the transmission stage) 
Noise (MAX) 60~68dB
Temp. rise  (MAX) 40°C 
Temp. rise (Oil)(MAX) 50°C
Vibration ≤20µm
Backlash ≤20Arcmin
Brand of bearings China Top brand C&U,LYC,TMB or other brands requested, SKF…..
Brand of oil seal CTY— ZheJiang or other brands requested
P —- series parallel shaft helical gear motor
P-series single stages
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
P37 25k6 112h13 110/160 0.12~3 3.88~130 240 10~374
P47 30k6 128.1h13 130/200 0.12~3 9.15~622 435 2.2~157
P57 35k6 136h13 180/250 0.12~5.5 5.21~200 605 6.5~276
P67 40k6 159.5h13 180/250 0.18~5.5 4.14~225 830 5.7~360
P77 50k6 200h13 230/300 0.25~11 4.28~280 1720 3.1~336
P87 60m6 246.7h13 250/350 0.37~22 4.13~1300 3060 1.1~356
P97 70m6 285h13 350/450 1.1~30 4.52~253 4400 3.6~131
P107 90m6 332.4h13 350/450 1.1~45 6.29~253 8990 2.7~236
P127 110m6 382.6h13 450/550 4.0~90 4.84~176 13800 4.2~316
P157 120m6 447h13 550/660 5.5~200 12.5~207 25710 3.3~125
 
P series double stages 
Model Output Shaft Dia. Center Height Output Flange Dia. Power Ratio Permitted Torque Output Speed 
Solid (mm)  (mm) (mm) (kw) (Nm) (RPM)
P37D17 25k6 112h13 110/160 0.12~0.18 129~322 190 4~10
P47D17 30k6 128.1h13 130/200 0.12~0.18 178~622 400 2.2~7.4
P57D37 35k6 136h13 180/250 0.12~0.37 134~967 615 1.4~10
P67D37 40k6 159.5h13 180/250 0.12~0.55 175~1429 900 0.9~8
P77D37 50k6 200h13 230/300 0.12~0.75 280~2613 1690 0.51~4.9
P87D57 60m6 246.7h13 250/350 0.12~1.5 249~4954 3070 0.28~5.7
P97D57 70m6 285h13 350/450 0.12~2.2 363~7348 4390 0.19~3.9
P107D77 90m6 332.4h13 350/450 0.12~4.0 255~14767 9630 0.09~5.6
P127D77 110m6 382.6h13 450/550 0.12~5.5 376~22323 13500 0.06-3.8
P127D87 110m6 382.6h13 450/550 5.5~11 166~418 13500 3.4~8.7
P157D97 120m6 447h13 550/660 0.55~11 197~6295 19710 0.22~7.3
Remarks: please refer to our catalogue or ask for sales man when your technical requirements is    special.

Package

Plastic bag + wooden carton

Certificate

FAQ

Q: Can you print other colors?
Yes. Customized color can be printed on the gear motor according to your requirements.
Q: Is that factory price?
Yes. We assure you all prices are based on factory.
Q:  What is the life span? what is the guarantee
The lifespan of gear motor can reach 5-20 years depending on different working conditions .The guarantee time is 1 year after delivery.
Q: What documents are available?
A full range documents including structural drawings, packing list, installation manual and relative certificates can be provided. Moreover, customs declaration is provided. We provide one-stop service for you. 
Q: Is it able to customized?
yes, we could re-design and produce the gear motor as your requirements if the quantity is large.

Application: Motor, Machinery, Transmission Equipment/ Crane
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Layout: Shunting
Gear Shape: Bevel
Step: Three-Step

induction motor

Are there specific maintenance requirements for AC motors to ensure optimal performance?

Yes, AC motors have specific maintenance requirements to ensure their optimal performance and longevity. Regular maintenance helps prevent unexpected failures, maximizes efficiency, and extends the lifespan of the motor. Here are some key maintenance practices for AC motors:

  1. Cleaning and Inspection: Regularly clean the motor to remove dust, dirt, and debris that can accumulate on the motor surfaces and hinder heat dissipation. Inspect the motor for any signs of damage, loose connections, or abnormal noise/vibration. Address any issues promptly to prevent further damage.
  2. Lubrication: Check the motor’s lubrication requirements and ensure proper lubrication of bearings, gears, and other moving parts. Insufficient or excessive lubrication can lead to increased friction, overheating, and premature wear. Follow the manufacturer’s guidelines for lubrication intervals and use the recommended lubricants.
  3. Belt and Pulley Maintenance: If the motor is coupled with a belt and pulley system, regularly inspect and adjust the tension of the belts. Improper belt tension can affect motor performance and efficiency. Replace worn-out belts and damaged pulleys as needed.
  4. Cooling System Maintenance: AC motors often have cooling systems such as fans or heat sinks to dissipate heat generated during operation. Ensure that these cooling systems are clean and functioning properly. Remove any obstructions that may impede airflow and compromise cooling efficiency.
  5. Electrical Connections: Regularly inspect the motor’s electrical connections for signs of loose or corroded terminals. Loose connections can lead to voltage drops, increased resistance, and overheating. Tighten or replace any damaged connections and ensure proper grounding.
  6. Vibration Analysis: Periodically perform vibration analysis on the motor to detect any abnormal vibrations. Excessive vibration can indicate misalignment, unbalanced rotors, or worn-out bearings. Address the underlying causes of vibration to prevent further damage and ensure smooth operation.
  7. Motor Testing: Conduct regular motor testing, such as insulation resistance testing and winding resistance measurement, to assess the motor’s electrical condition. These tests can identify insulation breakdown, winding faults, or other electrical issues that may affect motor performance and reliability.
  8. Professional Maintenance: For more complex maintenance tasks or when dealing with large industrial motors, it is advisable to involve professional technicians or motor specialists. They have the expertise and tools to perform in-depth inspections, repairs, and preventive maintenance procedures.

It’s important to note that specific maintenance requirements may vary depending on the motor type, size, and application. Always refer to the manufacturer’s guidelines and recommendations for the particular AC motor in use. By following proper maintenance practices, AC motors can operate optimally, minimize downtime, and have an extended service life.

induction motor

What are the common signs of AC motor failure, and how can they be addressed?

AC motor failure can lead to disruptions in various industrial and commercial applications. Recognizing the common signs of motor failure is crucial for timely intervention and preventing further damage. Here are some typical signs of AC motor failure and potential ways to address them:

  • Excessive Heat: Excessive heat is a common indicator of motor failure. If a motor feels excessively hot to the touch or emits a burning smell, it could signify issues such as overloaded windings, poor ventilation, or bearing problems. To address this, first, ensure that the motor is properly sized for the application. Check for obstructions around the motor that may be impeding airflow and causing overheating. Clean or replace dirty or clogged ventilation systems. If the issue persists, consult a qualified technician to inspect the motor windings and bearings and make any necessary repairs or replacements.
  • Abnormal Noise or Vibration: Unusual noises or vibrations coming from an AC motor can indicate various problems. Excessive noise may be caused by loose or damaged components, misaligned shafts, or worn bearings. Excessive vibration can result from imbalanced rotors, misalignment, or worn-out motor parts. Addressing these issues involves inspecting and adjusting motor components, ensuring proper alignment, and replacing damaged or worn-out parts. Regular maintenance, including lubrication of bearings, can help prevent excessive noise and vibration and extend the motor’s lifespan.
  • Intermittent Operation: Intermittent motor operation, where the motor starts and stops unexpectedly or fails to start consistently, can be a sign of motor failure. This can be caused by issues such as faulty wiring connections, damaged or worn motor brushes, or problems with the motor’s control circuitry. Check for loose or damaged wiring connections and make any necessary repairs. Inspect and replace worn or damaged motor brushes. If the motor still exhibits intermittent operation, it may require professional troubleshooting and repair by a qualified technician.
  • Overheating or Tripping of Circuit Breakers: If an AC motor consistently causes circuit breakers to trip or if it repeatedly overheats, it indicates a problem that needs attention. Possible causes include high starting currents, excessive loads, or insulation breakdown. Verify that the motor is not overloaded and that the load is within the motor’s rated capacity. Check the motor’s insulation resistance to ensure it is within acceptable limits. If these measures do not resolve the issue, consult a professional to assess the motor and its electrical connections for any faults or insulation breakdown that may require repair or replacement.
  • Decreased Performance or Efficiency: A decline in motor performance or efficiency can be an indication of impending failure. This may manifest as reduced speed, decreased torque, increased energy consumption, or inadequate power output. Factors contributing to decreased performance can include worn bearings, damaged windings, or deteriorated insulation. Regular maintenance, including lubrication and cleaning, can help prevent these issues. If performance continues to decline, consult a qualified technician to inspect the motor and perform any necessary repairs or replacements.
  • Inoperative Motor: If an AC motor fails to operate entirely, there may be an issue with the power supply, control circuitry, or internal motor components. Check the power supply and connections for any faults or interruptions. Inspect control circuitry, such as motor starters or contactors, for any damage or malfunction. If no external faults are found, it may be necessary to dismantle the motor and inspect internal components, such as windings or brushes, for any faults or failures that require repair or replacement.

It’s important to note that motor failure causes can vary depending on factors such as motor type, operating conditions, and maintenance practices. Regular motor maintenance, including inspections, lubrication, and cleaning, is essential for early detection of potential failure signs and for addressing issues promptly. When in doubt, it is advisable to consult a qualified electrician, motor technician, or manufacturer’s guidelines for appropriate troubleshooting and repair procedures specific to the motor model and application.

induction motor

What are the main components of an AC motor, and how do they contribute to its operation?

An AC motor consists of several key components that work together to facilitate its operation. These components include:

  1. Stator: The stator is the stationary part of an AC motor. It is typically made of a laminated core that provides a path for the magnetic flux. The stator contains stator windings, which are coils of wire wound around the stator core. The stator windings are connected to an AC power source and produce a rotating magnetic field when energized. The rotating magnetic field is a crucial element in generating the torque required for the motor’s operation.
  2. Rotor: The rotor is the rotating part of an AC motor. It is located inside the stator and is connected to a shaft. The rotor can have different designs depending on the type of AC motor. In an induction motor, the rotor does not have electrical connections. Instead, it contains conductive bars or coils that are short-circuited. The rotating magnetic field of the stator induces currents in the short-circuited rotor conductors, creating a magnetic field that interacts with the stator field and generates torque, causing the rotor to rotate. In a synchronous motor, the rotor contains electromagnets that are magnetized by direct current, allowing the rotor to lock onto the rotating magnetic field of the stator and rotate at the same speed.
  3. Bearing: Bearings are used to support and facilitate the smooth rotation of the rotor shaft. They reduce friction and allow the rotor to rotate freely within the motor. Bearings are typically located at both ends of the motor shaft and are designed to withstand the axial and radial forces generated during operation.
  4. End Bells: The end bells, also known as end covers or end brackets, enclose the motor’s stator and rotor assembly. They provide mechanical support and protection for the internal components of the motor. End bells are typically made of metal and are designed to provide a housing for the bearings and secure the motor to its mounting structure.
  5. Fan or Cooling System: AC motors often generate heat during operation. To prevent overheating and ensure proper functioning, AC motors are equipped with fans or cooling systems. These help dissipate heat by circulating air or directing airflow over the motor’s components, including the stator and rotor windings. Effective cooling is crucial for maintaining the motor’s efficiency and extending its lifespan.
  6. Terminal Box or Connection Box: The terminal box is a housing located on the outside of the motor that provides access to the motor’s electrical connections. It contains terminals or connection points where external wires can be connected to supply power to the motor. The terminal box ensures a safe and secure connection of the motor to the electrical system.
  7. Additional Components: Depending on the specific design and application, AC motors may include additional components such as capacitors, centrifugal switches, brushes (in certain types of AC motors), and other control devices. These components are used for various purposes, such as improving motor performance, providing starting assistance, or enabling specific control features.

Each of these components plays a crucial role in the operation of an AC motor. The stator and rotor are the primary components responsible for generating the rotating magnetic field and converting electrical energy into mechanical motion. The bearings ensure smooth rotation of the rotor shaft, while the end bells provide structural support and protection. The fan or cooling system helps maintain optimal operating temperatures, and the terminal box allows for proper electrical connections. Additional components are incorporated as necessary to enhance motor performance and enable specific functionalities.

China factory AC 230V Hollow Shaft Gear Motor   with Good quality China factory AC 230V Hollow Shaft Gear Motor   with Good quality
editor by CX 2023-12-07

China Hot selling ZD Nissei Like 100W 200W 400W 750W 1500W 2200W Three Phase Right Angle Hollow Shaft Induction Gear Motor with Free Design Custom

Warranty: 1 year, 1 Year
Model Number: ZDF3-25H100-100-S
Type: Induction Motor
Frequency: 50/60HZ
Phase: Three-phase
Protect Feature: Waterproof
AC Voltage: 220/380V
Efficiency: IE 2
Product Name: Right Angle Gear Motor
Application: Automation Industry
Rated Power: 0.1kw-2.2kw
Rated Voltage: 220V/380V
Power Supply: AC 3 Phase
Protection class: IP54/IP55
Packaging Details: cartons/pallets
Port: ZheJiang or HangZhou

Products Description ZDF3 Hypoid gear motor uses three-phase AC power as the input power, which is a combination of a high-power motor and a high-strength off-axis bevel gear motor. It has advantages of small size, low noise, high efficiency, long life, diversified output shafts and installation space-saving, widely used in food packaging machine, CNC Machine tool, large security inspection machines, meat grinders, chip conveyors, assembly lines, etc.Features of ZDF3 Hypoid Gear Motor :1.High Efficiency ,Low Noise ZD’s hypoid gear is heat-treated and then grinded to achieve high efficiency, low noise and long life.2.Symmetrical Double-Sided Installation Coaxial/double-sided flange for arbitrary installation3.Long Life and Good Sealing Adopt integrated structure, with excellent sealing and service life. ZDF3 Application Details Images Product Paramenters Motor Part (Engine part)PhaseThree-PhaseRated Power0.1kw, 0.2kw, 0.4kw, 0.75kw, 1.5kw, 2.2kwSupply Voltage3 phase 220V(50/60HZ), 3 phase 380V(50/60HZ)Insulation GradeF stageStart ModeDirect startCooling MethodOut fan full closeNumber of Poles4RatedContProtection GradeIP 54Reducer PartReduction ModeStraight shaft: hypoid gear, helical gearLubrication ModeLubricating grease( Maintenance-free)Output ShaftKey-way shaftOutput Shaft Materials40 CrHousing MaterialsAluminum die castingAmbient conditionsTolerance Temperature-10℃ -40 ℃Tolerance Humidity80% belowAltitudeBelow 1000mEnvironmental ConditionNo corrosive gas,explosive gas,No dust,DraughtyInstallationIndoorInstallation DirectionHorizontal,Vertical,Slant,Opposite angel. Related Products Why Choose Us FAQ Q1: What’re your main products?A1: We currently produce Brushless DC Gear Motor,Motor Driver,AC Gear Motor, DC Gear Motor, Planetary Gearbox,Drum Motor,Precision Cycloidal Reducer,Harmonic Drive,etc. You can check the specifications for above motors on our website and you can also tell us your special requirements by email and we will recommend the motor you need.Q2: How to select a suitable motor?A2: If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor as per your request accordingly.Q3: Do you have a customized service for your standard motors?A3: Yes, we can customize as per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.Q4: Do you have an individual design service for motors?A4: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge. Q5: What’s your lead time?A5: Generally speaking, our regular standard product will need 15-30 days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China Hot selling ZD Nissei Like 100W 200W 400W 750W 1500W 2200W Three Phase Right Angle Hollow Shaft Induction Gear Motor  with Free Design CustomChina Hot selling ZD Nissei Like 100W 200W 400W 750W 1500W 2200W Three Phase Right Angle Hollow Shaft Induction Gear Motor  with Free Design Custom

in Maceio Brazil sales price shop near me near me shop factory supplier Eccentric Shaft Gear Motor High Torque Low Rpm 12V 100rpm for Automatic Toilet manufacturer best Cost Custom Cheap wholesaler

  in Maceio Brazil  sales   price   shop   near me   near me shop   factory   supplier Eccentric Shaft Gear Motor High Torque Low Rpm 12V 100rpm for Automatic Toilet manufacturer   best   Cost   Custom   Cheap   wholesaler

Our item assortment also addresses locking assemblies (clamping elements/locking system), taper bushes, QD bushes, bolt-on hubs, torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod ends and yokes. With EPG model registered in a lot more than 70 nations like The usa , Europe , Japan and so on, it has associates amid planet prime enterprises, these kinds of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, etc. We also can design and style and make non-standard items to meet customers’ specific requirements.

eccentric shaft EPT motor higher torque low rpm 12v 100rpm for automatic rest room

one. Functions of LSTG-38246800
Voltage: 24V
Recent: 45mA
Velocity: ten-1200rpm
Torque: .three-10kgf.cm
Standard apps: Vehicle shutter, income detector, binding mackine, automated Television set rack, phase lighting, place of work products, EPT EPT

2. Specs of LSTG-38246800

Be aware: It really is the normal specificaitoin for reference only, We can pick DC motor with various voltage velocity to satisfy your torque and speed need.

Company Profile

one. About us

Major EPT: one) DC Brush motor: 6-130mm diameter, .01-1000W output EPT
2) DC Spur Gear EPT: twelve-110mm diameter, .1-300W output EPT
three) DC Planeary Gear EPT: 10-82mm diameter, .one-100W output EPT
4) Brushless DC EPT: 28-110mm, five-1500W output EPT
5) Stepper EPT: NEMA 08 to NEMA forty three, Can with EPT and direct screw
six) Servo EPT: 42mm to 130mm diameter, fifty-4000w
seven) AC Equipment EPT: 49 to 100mm diameter, 6-140 output EPT

two. Generation

Manufacturing line

EPT ampDelivery

Certifications

Client Visits

FAQ
Q: What is actually your main merchandise?
A:We at the moment generate Brushed Dc EPTs, Brushed Dc EPT EPTs, Planetary Dc Equipment EPTs, Brushless Dc EPTs, Stepper motors and Ac EPTs etc. You can check out the specifications for earlier mentioned motors on our internet site and you can e mail us to advocate essential motors per your specification as well.

Q:How to decide on a suited motor?
A:If you have motor photos or drawings to present us, or you have in depth specs like voltage, velocity, torque, motor dimensions, working mode of the motor, necessary existence time and sounds stage and many others, remember to do not hesitate to enable us know, then we can advocate appropriate motor for every your ask for appropriately.

Q: Do you have personalized provider for your stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd motors?
A:Sure, we can customise for each your request for the voltage, pace, torque and shaft dimensions/shape. If you need additional wires/cables soldered on the terminal or need to insert connectors, or capacitors or EMC we can make it too.

Q: you have individual design and style service for motors?
A:Of course, we would like to layout motors individually for our clients, but it may possibly require some mould cost and layout cost.

Q:Can I have samples for screening first?
A:Sure, absolutely you can. After verified the needed motor specs, we will estimate and offer a proforma invoice for samples, once we get the payment, we will get a Go from our account division to move forward samples appropriately.

Q:How do you make sure motor high quality?
A:We have our very own inspection procedures: for incoming materials, we have signed sample and drawing to make positive qualified incoming components for creation approach, we have tour inspection in the process and ultimate inspection to make confident competent products prior to delivery.

Q:What’s your lead time?
A:EPTly sEPTing, our normal stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd merchandise will need twenty five-30days, a bit EPTer for custom-made products. But we are really fleXiHu (West Lake) Dis.ble on the lead time, it will is dependent on the specific orders

Q:What is your payment term?
A:For all our new customers, we will require forty% deposite, 60% compensated prior to cargo.

Q:When will you reply right after acquired my inquiries?
A:We will reaction in 24 hours when get your inquires.

Q:How can I EPT you to make positive my funds is protected?
A:We are certified by the third party SGS and we have exported to over eighty five nations around the world up to June.2017. You can verify our popularity with our present clients in your region (if our buyers do not thoughts), or you can orEPTvia alibaba to get trade assurance from alibaba to make positive your cash is risk-free.

Q:What’s the minimum orEPTquantity?
A:Our minimum orEPTquantity relies upon on various motor types, please e-mail us to check out. Also, we usually do not settle for personalized use motor orders.

Q:What’s your transport technique for motors?
A:For samples and deals much less than 100kg, we typically recommend specific delivery For heavy deals, we generally propose air shipping and delivery or sea shipping and delivery. But it all is dependent on our customers’ wants.

Q:What certifications do you have?
A:We at the moment have CE and ROSH certifications.

Q:Can you send me your price list?
A:Considering that we have hundreds of diverse products, and value may differ per various specs, we are not ready to provide a price list. But we can quotation inside of 24 hrs once obtained your inquirues to make confident you can get the price tag in time.

Q:Can I visit your company?
A:Yes, welcome to check out our firm, but remember to enable us know at lEPT two months EPT to aid us make certain no other meetings during the day you pay a visit to us. Many thanks!

  in Maceio Brazil  sales   price   shop   near me   near me shop   factory   supplier Eccentric Shaft Gear Motor High Torque Low Rpm 12V 100rpm for Automatic Toilet manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Maceio Brazil  sales   price   shop   near me   near me shop   factory   supplier Eccentric Shaft Gear Motor High Torque Low Rpm 12V 100rpm for Automatic Toilet manufacturer   best   Cost   Custom   Cheap   wholesaler

in Gaya India sales price shop near me near me shop factory supplier Xg Ta Shaft Mounted Hanging Speed Gear Reducer for Conveyor & Material Handling manufacturer best Cost Custom Cheap wholesaler

  in Gaya India  sales   price   shop   near me   near me shop   factory   supplier Xg Ta Shaft Mounted Hanging Speed Gear Reducer for Conveyor & Material Handling manufacturer   best   Cost   Custom   Cheap   wholesaler

We provide OEM service. Our major items are Needle Roller bearings, Cylindrical Roller Bearings, Rod stop Bearings, Spherical plain bearings, Keep track of roller Bearings for Guideway, Roller Bearings, Merge Bearings for forklifts, H2o Pump Bearings, SNR Vehicle Bearings and all sorts of Spherical Bearings. The solution well displays environmental defense and energy saving. XG TA Shaft Mounted Hanging Pace Equipment EPT for Conveyor amp EPT Dealing with

Features:

1. Compact construction and simple assembly
2. Wide speed ranges and high torque
three. Low sounds, great sealing overall performance, large performance
4. Steady and risk-free, EPT life time, EPT
5. Multi-structure, numerous assembling methods

Merchandise image:

Specification for shaft mounted hanging EPT:

XG Shaft Mounted EPT Output Shaft EPTore [mm] Ratio(i) Rated torque
XG30 Phi30 7, ten, 12.5 180N.m
XG35 Phi35 five,10,fifteen,twenty,twenty five 420N.m
XG40 Phi40 5,ten,twelve.5,15,twenty,25 900N.m
Phi45
XG45 Phi45 five,10,12.five,15,20,twenty five 1400N.m
Phi50
Phi55
XG50 Phi50 5,ten,12.five,fifteen,twenty,twenty five 2300N.m
Phi55
Phi60
XG60 Phi60 5,10,twelve.5,15,20,twenty five 3600N.m
Phi70
XG70 Phi70 5,10,twelve.five,15,20,25,31 5100N.m
Phi85
XG80 Phi80 five,10,12.5,fifteen,twenty,25,31 7000N.m
Phi100
XG100 Phi100 five,10,twelve.5,fifteen,twenty,twenty five,31 11000N.m

FAQ
Q: Can you make the EPT with customization?
A: Of course, we can customize per your request, like flange, shaft, configuration, materials, etc.

Q: Do you provide samples?
A: Yes. Sample is offered for testing.

Q: What is your MOQ?
A: It is 10pcs for the starting of our enterprise.

Q: What is actually your guide time?
A: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd product need to have 5-30days, a little bit EPTer for personalized items.

Q: Do you supply EPT assist?
A: Indeed. Our business have style and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment group, we can supply EPT help if you
want.

Q: How to ship to us?
A: It is available by air, or by sea, or by train.

Q: How to pay the cash?
A: T/T and L/C is desired, with various currency, incXiHu (West Lake) Dis.Hu (West Lake) Dis. USD, EUR, RMEPT, etc.

Q: How can I know the solution is ideal for me?
A: gt1ST affirm drawing and specification gt2nd check sample gt3rd start off mass production.

Q: Can I come to your organization to check out?
A: Yes, you are welcome to visit us at any time.

Q: How shall we get in touch with you?
A: You can send out inquiry immediately, and we will respond in 24 hours.

  in Gaya India  sales   price   shop   near me   near me shop   factory   supplier Xg Ta Shaft Mounted Hanging Speed Gear Reducer for Conveyor & Material Handling manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Gaya India  sales   price   shop   near me   near me shop   factory   supplier Xg Ta Shaft Mounted Hanging Speed Gear Reducer for Conveyor & Material Handling manufacturer   best   Cost   Custom   Cheap   wholesaler

in Maturin Venezuela (Bolivarian Republic of) sales price shop near me near me shop factory supplier Hanging Shaft Mounted High Rpm Speed Transmission Gear Box manufacturer best Cost Custom Cheap wholesaler

  in Maturin Venezuela (Bolivarian Republic of)  sales   price   shop   near me   near me shop   factory   supplier Hanging Shaft Mounted High Rpm Speed Transmission Gear Box manufacturer   best   Cost   Custom   Cheap   wholesaler

With many years’ expertise in these strains, we have been distinguished from other suppliers in China by our rewards in competitive pricing, on-time shipping and delivery, prompt responses, on-hand engineering help and very good following-sales providers. Keeping in brain that excellent services is the important to cooperating with clients, we strive to fulfill higher high quality requirements, offer competitive prices and ensure prompt supply. a specialised provider of a entire range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers.

Hanging Shaft Mounted Higher Rpm velocity EPT gear box

Mounting type: Tie rod hanging shaft mountedZJY Sequence Shaft Mounted EPT EPT is mounted directly in a way of hanging on the dynamic enter shaft of matching learn EPT, which dispenses with the connecting accent and decelerator erection system. It is relevant for the mechanical generate of bucket elevator,belt conveyor, and fligEPT conveyor, as effectively as matching with other similar grasp EPT.

ZJY Series Shaft Mounted Speed EPT is manufactured in accordance to JEPT/T9050.1-1999 stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd, and main travel elements are produced of good quality alloy steels. XiHu (West Lake) Dis.Hu (West Lake) Dis. wheel is processed with carburizing and quenching and grinding tooth with precision of Class6(GEPT10095.1-2001). The EPT EPT is compact dimension with substantial carrying capability, EPT support existence, minimal sounds, and substantial efficiency. ZJY has the very same output torque as ZJ shaft mounted EPT. ZJY weights only 30% of ZJ, for that reason, the rigidity necessary for the grasp EPT body is drastically reduced, and ZJY drives stably.

Not only ZJY series shaft mounted velocity EPT can be operated double direction, but also can be geared up with anti-runback system to obtain one way braking.

Rated EPT .83KW~225KW
Rated Torque 265~17000N.m
Equipment Arrangement Helical Hardened EPT
Enter Pace 1450r/min, 960r/min, 750r/min
Output Pace 30~150r/min
Ratio I=1/ten,one/eleven.two,one/12.5,,1/25
Set up Type Tie rod hanging shaft mounted
EPTackstop Substitute parts, Anti-slip gadget

Solution images:

Our firm :
EPT reg was launched in 1982, which has far more than 36 a long time in R amp D and production of EPTes, gears, shaft, motor and spare parts.
We can offer you the suitable solution for uncountable applications. Our products are commonly used in the ranges of metallurgical, steel, mining, pulp and paper, suXiHu (West Lake) Dis.Hu (West Lake) Dis. and alcoholic beverages industry and a variety of other types of EPTs with a robust presence in the intercontinental marketplace.
EPT reg has grow to be a dependable provider, ready to source substantial good quality EPTes.With 36 years knowledge, we assure you the utmost reliability and protection for both solution and services.

Client going to:

Our Companies:

Pre-sale services one. Choose equipment design.
2.Design and style and manufacture items in accordance to clients’ EPT necessity.
3.Prepare complex private for consumers
Providers during marketing one.Pre-verify and settle for items ahead of delivery.
2. Assist customers to draft resolving programs.
Following-sale services one.Aid clients to get ready for the initial construction scheme.
two. Train the 1st-line operators.
three.EPTke initiative to get rid of the difficulties speedily.
4. Provide complex exchanging.

FAQ:
1.Q:What types of EPT can you create for us?
A:Primary merchandise of our company: UDL series speed variator,RV series worm equipment EPT, ATA series shaft mounted EPT, X,EPT collection equipment EPT,
P collection planetary EPT and R, S, K, and F collection helical-tooth EPT, much more
than one particular hundred designs and thousands of specs
2.Q:Can you make as for each custom made drawing?
A: Yes, we provide customized provider for buyers.
three.Q:What is your conditions of payment ?
A: thirty% Progress payment by T/T soon after signing the contract.70% prior to shipping and delivery
four.Q:What is your MOQ?
A: one Set

If you have any need for our products please feel free to speak to me.

  in Maturin Venezuela (Bolivarian Republic of)  sales   price   shop   near me   near me shop   factory   supplier Hanging Shaft Mounted High Rpm Speed Transmission Gear Box manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Maturin Venezuela (Bolivarian Republic of)  sales   price   shop   near me   near me shop   factory   supplier Hanging Shaft Mounted High Rpm Speed Transmission Gear Box manufacturer   best   Cost   Custom   Cheap   wholesaler

in Casablanca Morocco sales price shop near me near me shop factory supplier Custom Made Spile Shaft & Gear Shaft for Gear Reducer manufacturer best Cost Custom Cheap wholesaler

  in Casablanca Morocco  sales   price   shop   near me   near me shop   factory   supplier Custom Made Spile Shaft & Gear Shaft for Gear Reducer manufacturer   best   Cost   Custom   Cheap   wholesaler

We have exported our goods to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the United states, Canada, and so on. Furthermore, all our manufacturing methods are in compliance with ISO9002 requirements. There is a technological centre of province degree, EPG academician operating station, experiment station for EPG publish physicians, and national 863 program set up in EPG team. With these platforms and strong specialized ability, the more than 400 professionals have created all selection of particular substantial exact and high strength goods, performed mildew packages for essential components in the automobile and countrywide market revitalizing software, ensuing far more than 5000 developed above, between which 33 objects are autonomous patent technological innovation with four patent approved . Customized Made SEPT Shaft amp Equipment Shaft For Gear EPT

Content 20Cr2Ni4
Equipment Hobbing radic
Equipment Grinding radic
Spline Milling radic
Spling Grinding radic
Strain Angle twenty deg
Helixal angle Personalized Produced
Heat Remedy Carburizing/Cement Hardened
Area Hardness 58-62 HRC
Gear Accuracy Quality six-7 Grade (ISO 1328)

  in Casablanca Morocco  sales   price   shop   near me   near me shop   factory   supplier Custom Made Spile Shaft & Gear Shaft for Gear Reducer manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Casablanca Morocco  sales   price   shop   near me   near me shop   factory   supplier Custom Made Spile Shaft & Gear Shaft for Gear Reducer manufacturer   best   Cost   Custom   Cheap   wholesaler

in Namangan Uzbekistan sales price shop near me near me shop factory supplier Shaft Mounted Parallel Shaft Helical Gear Reducer manufacturer best Cost Custom Cheap wholesaler

  in Namangan Uzbekistan  sales   price   shop   near me   near me shop   factory   supplier Shaft Mounted Parallel Shaft Helical Gear Reducer manufacturer   best   Cost   Custom   Cheap   wholesaler

Our organization pays specific consideration to customers’ demands, listening to the particular specifications of every consumer and guaranteeing whole satisfaction. we supply chromed bar and tubes for hydualic and pheumatic cylinders. There is a technical centre of province amount, EPG academician operating station, experiment station for EPG put up physicians, and countrywide 863 software set up in EPG team. With these platforms and robust technological capacity, the a lot more than 400 experts have designed all range of special higher exact and substantial energy merchandise, performed mould plans for important factors in the automobile and countrywide market revitalizing plan, resulting more than 5000 produced in excess of, amongst which 33 products are autonomous patent engineering with four patent approved . Specialized parameter

Housing material EPT200 substantial-strength forged iron(EWF37,EWF47,EWF57,EWF67,EWF77,EWF87)
Housing materials EPT250 Substantial strength cast iron(EWF97,EWF107,EWF127,EWF157)
Gear substance 20CrMnTi
Gear Floor amphardness HRC58 deg-sixty two deg
Equipment main hardness HRC33 deg-78 deg
Enter/Output shaft materials 40Cr
Gear Machining precision Correct grinding six-five grade
Heat remedy Carburizing,Quenching and many others
Performance up to 92%
Sound(Max) 60-67dEPT
Set up sort Foot mounted,flange mounted
Output kind Sound shaft,Hollow shaft,splined hollow shaft,shrink disk
EPTearing model NSK,SKF,HREPT,ZWZ etc
Oil seal brand NAK,KSK etc
Lubricant VG220
Motor IP55, F course
Motor shaft 40Cr, Carburizing,Quenching etc
Guarantee 12months
Shade EPTlue,Grey

Functions
#9830High efficiency and preserve cost.
#9830Stable running, lower noise and EPT provider daily life.
#9830PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel-axes output, compact construction, large torque EPT.

Technological Info
ratio i=four.3~273,mixture of EWF/EWR is up to18509
Efficiency: two-stage96%,3-phase 94%,and mix of EWR/EWR85%.
Dimension : EWF37~EWF157.

EPT Application
EPT Plant Tools
Metallurgical Industry
Metal Forming EPTry
Petrochemical Business
Mining EPT
Hoisting EPTry
Development Sector
Environmental Protection Sector
Cable Industry
Foodstuff EPTry

Certificates
Passed quot ISO 9001 Global EPT Method Certificate quot, quotEurope CE Certificate quot, quot Swiss SGS Certificate quot, quotHigh-tech EPTrprise certificate of ZheJiang town quot, quotExcellent overall performance administration EPTrprise of ZheJiang town quot,and so on.

FAQ
1. Q: Can you make as per personalized drawing?
A: Indeed, we offer tailored service for consumers.
2. Q: Are you a manufacturing unit or trading organization?
A. We are manufacturer in ZheJiang EPT.
three. Q: What’s your MOQ?
A: 1 piece.
four. Q: What is actually your production time?
A: seven-fifteen functioning daEPTafter acquiring payment.
five. Q: What is your payment phrases?
A: T/T, 30% payment EPT, 70% balance payment need to be paid just before shipping.
6. Q: What’s your bundle?
A: In picket box EPT.

ZheJiang EPT Gear EPT Co.,Ltd., previous a joint venture invested by is a ZheJiang EAST PUMP Team and Well Firm of The us.We are professional company of the gear EPTs and EPTize in the equipment EPTs area in EPT for 20 several years. EPT has superb R ampD team,leading-rating creation and check gear.So we have the robust EPT in the deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ing and producing the stXiHu (West Lake) Dis.Hu (West Lake) Dis.rds kind as properly as the personalized variety equipment EPT for our buyers.

  in Namangan Uzbekistan  sales   price   shop   near me   near me shop   factory   supplier Shaft Mounted Parallel Shaft Helical Gear Reducer manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Namangan Uzbekistan  sales   price   shop   near me   near me shop   factory   supplier Shaft Mounted Parallel Shaft Helical Gear Reducer manufacturer   best   Cost   Custom   Cheap   wholesaler

Donly made in China – replacement parts – in Medina Saudi Arabia Parallel Shaft Cylindrical Gear Units Hardened Gearbox with ce certificate top quality low price

Donly  made in China - replacement parts -  in Medina Saudi Arabia  Parallel Shaft Cylindrical Gear Units Hardened Gearbox  with ce certificate top quality low price

Donly  made in China - replacement parts -  in Medina Saudi Arabia  Parallel Shaft Cylindrical Gear Units Hardened Gearbox  with ce certificate top quality low price

We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 distinct branches. For much more information: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

1. Merchandise Description
 

The harden experience equipment units incorporate the two Z and D series and can be employed in metallurgy, mining, transportation,  cement, architecture, chemical market, textile, light sector and power sector ,etc. They have a lot of features as pursuing:
 

Gear Gear is made by high-quality alloy steel with carburizing and quenching. The tooth surface hardness is HRC57-61.
Equipment Root Energy the gear root by shot peening to improve the bending strength in gear root. 
Casing Use the break up casing to aid repairs
Transmission Efficiency  ninety eight% for the one-stage, ninety six% for the double-phase, 94% for the a few-stage and 92% for the four-stage.

2. Ambient Circumstances
 

Speed of substantial-velocity shaft The enter pace of high-speed shaft is equal or considerably less than 1500r/min 
Round Velocity of gear  equivalent or significantly less than 20m/s
Ambient Temperature The ambient temperature ranging from -forty to fifty ºC. When decrease than ºC, please warmth the lubricant before the operation 

three. Solution Designations 

4. Type 

five. The Nominal Electrical power And Thermal Energy Of DCY

6. Assembly Type 

seven. Bundle Photo 

8. FAQ

1) What sorts of gearbox can you produce for us.

A: Major products of our organization: Modular Gearmotor R,F,K,S. Substantial Precision Modular Gearbox H,B,P,HK. A few-Period Asynronous Motor. Customerized Gearbox. 

two) Can you make as for each custom made drawing?

A: Of course, we offer you tailored services for clients. 

three) What is your phrases of payment? 

A: 30% advanced payment by T/T right after signing the contract. 70% prior to shipping. 

The use of first tools manufacturer’s (OEM) element numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating item use and compatibility. Our firm and the shown substitution components contained herein are not sponsored, authorized, or made by the OEM.

Donly  made in China - replacement parts -  in Medina Saudi Arabia  Parallel Shaft Cylindrical Gear Units Hardened Gearbox  with ce certificate top quality low price

Donly  made in China - replacement parts -  in Medina Saudi Arabia  Parallel Shaft Cylindrical Gear Units Hardened Gearbox  with ce certificate top quality low price

Donly  made in China - replacement parts -  in Medina Saudi Arabia  Parallel Shaft Cylindrical Gear Units Hardened Gearbox  with ce certificate top quality low price